Connecting network cables
LiveWire PowerCore 3300 includes Gigabit Ethernet ports and Integrated Remote Access Controller (iDRAC) ports used for remotely accessing and troubleshooting LiveWire PowerCore 3300. See LiveWire PowerCore 3300 front / back panels for the location of these ports.
To connect network cables:
◦ Use a standard Ethernet cable to connect these ports to your network.
TIP: To reach LiveWire PowerCore 3300 through an SSH connection, you can use an Ethernet cable connected directly between the Gigabit Ethernet port on LiveWire PowerCore 3300 and your PC or laptop. LiveWire PowerCore 3300 eth0 port is configured at the factory to have a DHCP IP address with a fail over to 192.168.1.21. The PC or laptop must be configured to be on the same IP subnet.